Maintenance Lubricants and Penetrating Fluids
THORLABS INC PTA1006 - 500 mL Bottle of Compressor Oil
For use in the PTA512, PTA513, and PTA514 are high-performance air compressors
Electron Microscopy Sciences Invoil Diffusion Pump Oil C 500 ML
Consists of esters or specially selected hydrocarbon fractions. They were developed for vapor-diffusion pump fluids. They are high purity, very low pressure, and very stable. Pressures lower than 10^-7 torr obtainable. No need for cold trap. Good pumping speed and no corrosive deposits or vapors. Oil C obtains the highest vacuum pressure (10-7 torr) of all of the oils.
Scientific Instrument Services Inc Edwards ULTRAGRADE™ 19 Oil 12 X 1L
Edwards ULTRAGRADE™ Performance 19 uses a solvent refining process, whereas this oil is produced by a unique hydro treating process. This process eliminates nitrogen, sulphur and oxygen and the aromatic hydrocarbons, leaving a clear base stock essentially free of impurities. When combined with additives, the ULTRAGRADE™ Performance oils give improved vacuum performance, thermal and oxidation stability and rust inhibition. The properties of the oils allow them to be used in a wide range of applications. 12x1L
Hach Company Stopcock Grease, 150 gram Tube
For lubricating ground glass joints, glass stopcocks and valves, Tensette Pipets, and for sealing desiccators. Lubricant has low vapor pressure and resists attack by acidic and alkaline solutions.
Electron Microscopy Sciences Crystalbond™ 555 Adhesive Stick, White 90 GR
A temporary adhesive. These wash away adhesives are used as a temporary bond for holding delicate crystals, metallurgical specimens, glass components, and ceramic substrates for dicing, slicing, drilling and polishing. These materials adhere readily to metals, glass, ceramic and then can be washed after machining away using various solvents. Use as a water soluble temporary bond, for precise high purity work.
Color: White
Softening: 125°F (52°C)
Flow point: 130°F(54°C)
Viscosity: 500 cps
Electron Microscopy Sciences Lapping Vehicle Formula C Lube 16 OZ
For oil soluble compounds, such as Glennel UC and US, specially designed to enhance cutting action and leave a superior finish.
PFEIFFER VACUUM INC Vacuum Pump Oil, Pfeiffer Vacuum Inc., P3 Pump Oil, 1 Liter
Vacuum Pump Oil, Pfeiffer Vacuum Inc., P3 Pump Oil, 1 Liter
World Precision Instrument Barrier Milk Instrument Protector, Lubricant
Barrier Milk Ready to Use Spray helps prevent corrosion of instruments when used prior to sterilization. Protects and extends the life of instruments during autoclaving. Simply spray the instrument directly before autoclaving with the unique water-based blend of lubricants and corrosion inhibitors. The fine mist works its way into hinges and box locks as well as covering all instruments with protection.
Electron Microscopy Sciences Invoil Diffusion Pump Oil BW 500 ML
Consists of esters or specially selected hydrocarbon fractions. They were developed for vapor-diffusion pump fluids. They are high purity, very low pressure, and very stable. Pressures lower than 10^-7 torr obtainable. No need for cold trap. Good pumping speed and no corrosive deposits or vapors. Water-white oil with a higher pumping speed than B. High purity suitable for evacuation of mass spectrometers.
Ted Pella Inc PELCO Tabs, Carbon Conductive Tabs, 9mm OD, 98/pk
The simplicity of application and smooth, clean surfaces of PELCO Tabs Carbon Conductive Tabs are a significant improvement compared to many of the other common adhesives that have been used in SEM mounting. Both tab sides have a thick conductive adhesive (conductive inner tab is 35µm and the adhesive is 45µm on each side for a total thickness of 125µm [5 mils]) with a liner on both sides, a transparent liner and white liner respectively. They are ready for immediate use. The top protective liner does not have to be removed until the sample is ready to be mounted. This reduces possible contamination. Outgassing is negligible.
Electron Microscopy Sciences Lapping Vehicle Glenoil Lube 16 OZ
Lapping vehicle is ideal l for all Glennel UB Compounds and Diamond Sprays. It assures continued separation of diamond particles and constant removal of lap debris.